المزيد من العلامات التجارية من

  • Name

      Product family information

      ActiLume 1-10 V can be connected to the 1-10 V DC control input of an HF-R ballast. ActiLume 1-10 V is calibrated for use in a standard office situation.

      Benefits

      A daylight-regulation/presence-detection device which can easily be fitted in a 1-10 V luminaire
      The sensor can be connected to the ballast directly (only dimming) or in combination with the SwitchBox (dimming and switching)
      Offers easy-to-install energy-saving solutions
      Has the same form fit as the ActiLume DALI & ActiLume MicroLuxSense sensor with cover

      Features

      If needed, ActiLume 1-10 V can be adjusted manually, using a rotating diaphragm to adjust the set point
      The sensitivity of the sensor can be changed within a range from 1/3 to 3
      With the rotary control it is possible to select a delay time between 1 and 30 minutes
      In combination with the SwitchBox, up to 3 HFR 254 T5 ballasts can be switched, resulting in extremely low stand-by losses (< 350 mW)
      Personal control via the Touch and Dim functionality on the SwitchBox
      Push-button to activate 100 hours burn-in mode for the lamps

      Applications

      ActiLume 1-10 V is designed for various indoor applications
      ActiLume 1-10 V is designed for ceiling heights of max. 3.5 m
      Downloads
      Leaflets
      Visuals
      • التحقق من منتج لإضافته
         
      • التحقق من منتج لإضافته
         
      • التحقق من منتج لإضافته
         
      التحقق من منتج لإضافته

      اعثر على أقرب موزع أو  شريك



      اختر دولتك المفضلة لتحديد موقع أقرب موزع أو شريك لك.

       

      أداة تحديد موقع الموزع أو الشريك

      نظرة على خريطة العالم