View all 2 products

Dimming – a next step in energy saving

HF-Regulator Intelligent Touch DALI for PL-T/C and TL5C

HF-Regulator Intelligent Touch DALI for PL-T/C and TL5C

  • Name

    Product family information

    Intelligent high-frequency electronic dimming ballast, using DALI (Digital Addressable Lighting Interface according to IEC62386) or Touch and Dim push-button protocol for fluorescent lamps. Features Corridor Mode, programmable with Philips MultiOne. High-frequency operation improves light quality and lamp lifetime. Pre-empts upcoming legislation as it meets A1BAT requirements.

    Benefits

    Programmed start: flicker-free ignition in 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life
    Smart power ensures constant light, independent of mains fluctuations, and dimming from 3 to 100%
    Protected against excessive mains voltages, incorrect connections and incorrect lamp use

    Features

    Extremely low stand-by losses, controlled cut-off for dimming levels above 80%
    Combined with controls, additional energy savings can be achieved
    Stop circuit is activated within 5 seconds of lamp failure (safety stop), and ballast resets automatically after lamp replacement
    HF operation improves light quality and lamp lifetime
    Programmable Corridor Mode
    Compliant with European and Asian norms and suitable for emergency lighting systems

    Applications

    Indoor general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)
    Downloads
    Leaflets
    Visuals
    • التحقق من منتج لإضافته
       
    • التحقق من منتج لإضافته
       
    • التحقق من منتج لإضافته
       
    التحقق من منتج لإضافته

    اعثر على أقرب موزع أو  شريك



    اختر دولتك المفضلة لتحديد موقع أقرب موزع أو شريك لك.

     

    أداة تحديد موقع الموزع أو الشريك

    نظرة على خريطة العالم