StreetSaver – saves energy and more

StreetSaver

StreetSaver

  • StreetSaver – saves energy and more

    LED
    • Energy savings of up to 70% compared to mercury-based post-top luminaires
    • Minimises light pollution
    • Designed around LEDs

Videos

[trigger to render Video Gallery]

Images

Product family information

Under new regulations, all mercury-based lamps are prohibited from 2015 onwards. This means that all luminaires using these lamps need to be replaced as well. However, the installed base of these luminaires is huge, and the municipalities do not have the budget for such large-scale replacement, especially in this period of economic austerity. At the same time, the municipal authorities are facing tremendous pressure to save energy and to reduce light pollution of the night sky (many mercury installations have a transparent bowl, sending light everywhere). StreetSaver is an affordable, high-quality solution that enables the municipalities to address all these issues at once by changing their mercury- based luminaires to a LED system – for only limited investment.

Features

Dedicated LED design
All the light is directed towards the ground
Robust aluminium housing
Lifetime of 50,000 hours

Applications

Residential areas
Piazzas and parks
Pedestrian areas
Product family details
General
Type
  • BPP007
Light source
  • Integral LED-module
Power
  • 40 W (dimmable version)
  • 39 W (non-dimmable version)
Beam angle
  • 120º, rotation symmetric
Luminous flux
  • 2350 lm, warm white; 2456 lm, neutral white (dimmable version)
  • 2442 lm, warm white; 2417 lm, neutral white (non-dimmable version)
Luminaire efficacy
  • Up to 61 lm/W (dimmable version)
  • Up to 62 lm/W (non-dimmable version)
Correlated Colour Temperature
  • 3000 or 4000 K
Colour Rendering Index
  • > 80, 3000 K
  • > 70, 4000 K
Maintenance of lumen output - L70
  • 50,000 hours at 35ºC
Driver failure rate
  • 0.5% per 6000 hours (dimmable version)
  • 0.5% per 5000 hours (non-dimmable version)
Operating temperature range
  • -20ºC < T a < 35ºC
Driver
  • Built-in (self ballasted LED-module)
Mains voltage
  • 230 V / 50-60 Hz
Inrush current
  • 65 A at 100 µs (dimmable version)
  • 7.1 A at 61.2 µs (non-dimmable version)
Optic
  • Symmetrical wide beam
Optical cover
  • Flat cover
Material
  • Housing: aluminium
  • Optical cover: polycarbonate
Colour
  • Ultra-dark grey
Connection
  • Pre-wired
Maintenance
  • Easy acces to driver
Installation
  • Post top 60 mm pole fixation
  • Fixation with 2 M10x25 screws
  • Pre-wired with 6 m cable
  • Recommended mounting height: 4 m
  • Standard tilt angle post top: 0º
  • Adjustable tilt angle: not available
  • Adjustable light distribution: not available
  • Max SCx: 0,08 m²

اعثر على أقرب موزع أو  شريك



اختر دولتك المفضلة لتحديد موقع أقرب موزع أو شريك لك.

 

أداة تحديد موقع الموزع أو الشريك

نظرة على خريطة العالم