LL120X LED150S/865 2x PSU O 5 WH

Specifications Show all

General Information

Number of light sources	6  [ 6 pcs]
Lamp family code	LED150S  [ LED module, system flux 15000 lm]
Beam angle of light source	120 °
Light source colour	865 cool daylight
Light source replaceable	No
Number of gear units	2 units
Driver/power unit/transformer	PSU  [ Power supply unit]
Driver included	Yes
Optic type	No  [ -]
Optical cover/lens type	O  [ Opal]
Luminaire light beam spread	126° x 116°
Emergency lighting	No  [ -]
Control interface	-
Internal wiring	Standard
Feed-through wiring	Feed-through wiring 5-phase
Connection	CU5  [ Connection unit 5-pole]
Cable	-
Protection class IEC	Safety class I (I)
Mounting	SMB  [ Ceiling-mounting bracket]
Standard RAL colour	Traffic white (9016)
Ready-to-install	-
Glow-wire test	650/5  [ Temperature 650 °C, duration 5 s]
Flammability mark	F  [ For mounting on normally flammable surfaces]
Accessories included	MB-SW  [ Mounting bracket for suspension wire]
CE mark	CE mark
ENEC mark	ENEC mark
Mechanical accessories	No  [ -]
Constant light output	No
Number of products on MCB	24
RoHS mark	RoHS mark
Product Family Code	LL120X  [ CoreLine Trunking]

Light Technical

Light distribution

DIR  [ Direct lighting]

Operating and Electrical

Input voltage	220 to 240 V
Input frequency	50 to 60 Hz
Control signal voltage	0-16 V DC DALI
Circuit	No  [ -]
Circuit option	5  [ 5 conductors]
Initial CLO power consumption	- W
Average CLO power consumption	- W
Inrush current	19 A
Inrush time	0.28 ms
Power factor (min.)	0.97

Controls and Dimming

Dimmable

No

Mechanical and Housing

Housing material	Steel
Reflector material	-
Optic material	Acrylate
Optical cover/lens material	Acrylate
Fixation material	Steel
Optical cover/lens finish	Opal
Overall length	3450 mm
Overall width	95 mm
Overall height	52 mm
Height	52 mm
Diameter	-

Approval and Application

Ingress protection code	IP20  [ Finger-protected]
Mech. impact protection code	IK02  [ 0.2 J standard]

Initial Performance (IEC Compliant)

Initial luminous flux	15000 lm
Luminous flux tolerance	+/-2%
Initial LED luminaire efficacy	139 lm/W
Init. Corr. colour temperature	6500 K
Init. colour rendering index	≥80
Initial chromaticity	(0.38, 0.38) SDCM <3
Initial input power	108 W
Power consumption tolerance	+/-10%

Over Time Performance (IEC Compliant)

Driver failure rate at 5,000 hours	1 %
Median useful life L70B50	70000 h
Median useful life L80B50	50000 h
Median useful life L90B50	25000 h

Application Conditions

Ambient temperature range	-20 to +35 °C
Average ambient temperature	25 °C
Maximum dimming level	Not applicable
Suitable for random switching	No

Product Data

Full product code	871869638142700
Order product name	LL120X LED150S/865 2x PSU O 5 WH
EAN/UPC – product	8718696381427
Order code	38142700
Numerator – quantity per pack	1
Numerator – packs per outer box	1
Material no. (12NC)	910925864022
Net weight (piece)	6.990 kg